Retrofit interface - AZ82.70-P-0001-07T

Fig 1: Identifying Sound Deadening Mat On Paneling & Velcro Strip On iPod Interface

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Partially remove the sound deadening mat on the trim (14) as per the picture.
Stick velcro strip (16) onto hands-free system interface(2) as per the picture.
Stick hands-free system interface (2) in parallel with the reference edge (A) on the trim (14).
Connect telephone console connector (5) of the telephone console with PSC-adapter to the interface for the hands-free system (2).
Route line of telephone console connector (5) on the panel as per the picture and fasten with felt strip.
Contact connector interface (19) of wiring harness FSE 12 (see enlarged view) to hands-free system interface (2).
Stick on hands-free system interface (2) so that later on the telephone console connector (5) of the telephone console with PSC-adapter can be accommodated in the cutout between the air conducting ducts (see enlarged view). The surfaces which are stuck together must be clean, dry and free of grease.

Fig 2: Routing Line Of Telephone Console Connector
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.