Remove/install media interface control unit - AR82.60-P-1030T

MODEL 211.0 /2 with CODE (518) Media interface 

Fig 1: Identifying Media Interface Control Unit Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Buffer basic data of media interface control unit (N125/1) in STAR DIAGNOSIS	When replacing the media interface control unit (N125/1). Installation:  Transfer basic data from STAR DIAGNOSIS to the new media interface control unit (N125/1).
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
2	Remove left cover under the dashboard		AR68.10-P-1500T
3	Disconnect fiber optic cable connector (1) and cover equipment connector at media interface control unit (N125/1)
	Notes on avoiding damage to fiber optic cables during repair work	With Media Oriented System Transport (MOST)	AH82.60-P-0001-05AK
4	Disconnect electrical connector (2), unbolt nuts (3) and remove media interface control unit (N125/1)
5	Disconnect electrical connector (4) and remove media interface control unit (N125/1)
6	Install in the reverse order