Perform version coding subsequently - AN82.61-P-0001-05T

The described STAR DIAGNOSIS menu guidance corresponds to the German DAS version 05/2004 and may deviate from other versions.

1. Connect STAR DIAGNOSIS to data link connector (X11/4).
2. Start DAS, enter vehicle model and select the "Control units" menu item.
3. In the "Control unit groups" menu, select the subgroups
   • "Information and communication"
   • "IC instrument cluster"
   • "Control unit adaptations"
   • "Variant coding"
   • "AGW audio gateway"
   • "Special equipment"

   one after the other.

   Shown on model 211.2 

   Fig 1: Locating Data Link Connector

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
4. In the "special equipment" menu, set the "TEL telephone" menu item from "not present" to "present" and transfer the coding into the control unit
5. End DAS by navigating from the "Special equipment" menu back to the "Main groups" menu and disconnect STAR DIAGNOSIS.