Gear recognition sensor, location / task / function - GF26.19-P-4007A
TRANSMISSION 716.6 in MODEL 203, 230 with CODE (424) Sequentronic automated manual transmission (SEQ) up to Model Year 8
TRANSMISSION 716.6 in MODEL 208, 209, 211 with CODE (424) Sequentronic automated manual transmission (SEQ)
| Gear recognition sensor, location | The gear recognition sensor (B56/1) is bolted to the top of the manual transmission. | |
| Gear recognition sensor function | Registers the position of the shift rod in the transmission based on its longitudinal and rotational motion, and relays this detected position to the automated manual transmission control module (N15/6) in the form of two analog signals. | |
| Gear recognition sensor, function | GF26.19-P-4007-02A |