Removing tapered roller bearing outer race from rear axle housing - AR35.31-P-0550-02T

Fig 1: Identifying Spring Compressor (116 589 18 61 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Insert assembly arbor (046) for differential pinions on right-hand side and press complete differential to the left until it touches the rear axle housing.
   Fig 2: Inserting Assembly Arbor

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
2. Remove left and right tapered roller bearing outer race (11a).
3. Mark taper roller bearing outer races (11a).

Fig 3: Identifying Roller Bearing Outer Races

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.