Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A

Illustrated on model 210 

Fig 1: Connecting STAR DIAGNOSIS - Illustrated On Model 210

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Illustrated on model 163 

Fig 2: Connecting STAR DIAGNOSIS - Illustrated On Model 163

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 164.1 

Fig 3: Connecting STAR DIAGNOSIS - Illustrated On Model 164.1

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Illustrated on model 461.302 

Fig 4: Connecting STAR DIAGNOSIS - Illustrated On Model 416.302

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Illustrated on model 171.4 

Fig 5: Connecting STAR DIAGNOSIS - Illustrated On Model 171.4

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Connect Star Diagnosis (0100).
2. Switch on ignition.
3. Start the Diagnosis Assistance System.
4. Select the model series in the menu.

   The work procedures in the diagnosis program are menuassisted.

5. Disconnect STAR DIAGNOSIS (0100).

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.