LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> E350 Base >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- E350 (211.256) >> Testing & Repair >> Read out propeller shaft inclination angles from memory; correct if necessary - AR41.10-P-0086-01R

Read out propeller shaft inclination angles from memory; correct if necessary - AR41.10-P-0086-01R

AR41.10-P-0086-01R  Read out propeller shaft inclination angles from memory; correct if necessary  
REFER TO FORMS Data Sheet for Measuring Inclination Angle, form OF41.10-P-3000-01A
MODIFICATION NOTES

28.1.09 Value changed: Center articulation angle from front propeller shaft to rear propeller shaft (∠2) Model 230 except 230.470/472/474/479 (AMG) *BE41.10-P-1002-01A 
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 204 except 204.077/277 Model 204.077/277
BE41.10-P-1001-01G Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33 to +0.67 -0.50 to +0.67
BE41.10-P-1002-01G Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.00 to +0.83 +0.00 to +0.83
BE41.10-P-1003-01G Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -0.83 to -0.17 -0.98 to -0.33
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 207
BE41.10-P-1001-01G Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33 to +0.67
BE41.10-P-1002-01G Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.00 to +0.83
BE41.10-P-1003-01G Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -0.83 to -0.17
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 212 except 212.074/077/274/277 Model 212.074/077/274/277
BE41.10-P-1001-01G Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33 to +0.67 -0.3 to +0.2
BE41.10-P-1002-01G Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17 to +1.00 -0.3 to +0.3
BE41.10-P-1003-01G Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00 to -0.17 -0.4 to -0.9
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 218 except 218.374 Model 218.374
BE41.10-P-1001-01G Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33 to +0.67 -0.3 to +0.2
BE41.10-P-1002-01G Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17 to +1.00 -0.3 to +0.3
BE41.10-P-1003-01G Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00 to -0.17 -0.4 to -0.9
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 211 except model 211.076/077/276/277 (AMG) Model 211.076/276 (AMG) Model 211.077/277 (AMG)
BE41.10-P-1001-01A Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33° to +0.67° -0.50° to +0.66° -0.33 to +0.67
BE41.10-P-1002-01A Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17° to +1.00° +0.16° to +1.00° +0.17 to +1.00
BE41.10-P-1003-01A Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00°...-0.17° -0.50°...-1.00° -1.00 to -0.33
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 219 except model 219.376/377 (AMG) Model 219.376 (AMG) Model 219.377 (AMG)
BE41.10-P-1001-01A Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33° to +0.67° -0.50° to +0.42° -0.33 to +0.67
BE41.10-P-1002-01A Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17° to +1.00° +0.17° to +0.83° +0.17 to +1.00
BE41.10-P-1003-01A Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00° to -0.17° -1.00° to -0.50° -1.00 to -0.33
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 230 except 230.470/472/474/479 (AMG) Model 230.470/472/474/479 (AMG)
BE41.10-P-1001-01A Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.33° to +0.67° -0.30° to +0.40°
BE41.10-P-1002-01A Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° -0.20° to +1.00° +0.110°...+1.00°
BE41.10-P-1003-01A Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00° to -0.17° -1.00°...-0.30°
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 216.371/373/376/386/394 Model 216.374/377/379
BE41.10-P-1001-01F Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.50 to +0.67 -0.50 to +0.60
BE41.10-P-1002-01F Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17 to +1.00 +0.17 to +1.00
BE41.10-P-1003-01F Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00 to -0.17 -1.00 to -0.17
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE

Number Designation Model 221.00/022/026/028/054/056/057/070/071/073/08/09/10/122/126/128/170/171/173/176/180/183/184/186/194 Model 221.074/077/174/177/179
BE41.10-P-1001-01F Front inclination angle from transmission to front propeller shaft (∠1) ∠° -0.50 to +0.67 -0.50 to +0.60
BE41.10-P-1002-01F Center inclination angle from front propeller shaft to rear propeller shaft (∠2) ∠° +0.17 to +1.00 +0.17 to +1.00
BE41.10-P-1003-01F Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) ∠° -1.00 to -0.17 -1.00 to -0.17

IMPORTANT The display indicates that the meter is ready to measure angle 5. This angle is no longer measured.

  1. Press the "MEMORY" button once.

    IMPORTANT The main menu is displayed.

  2. Press "MEMORY" button again.

    IMPORTANT The memory displays the measured angle (a, b, d) and the resulting articulation angle ∠ 1 (c) and articulation angle ∠ 2 (e).

  3. Record inclination angle ∠1 (c) e.g. +0.26° and inclination angle ∠2 (e) e.g. +0.58° on the data sheet.
  4. Press "STEP" button.
    Fig 1: Display - Measured Angles
    G07070354Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

    Memory screen 

    IMPORTANT The measured angles (d, f) and the calculated inclination angle ∠3 (g) are displayed.

  5. Enter articulation angle ∠3 (g) e.g. 0.08° into data sheet.

    Memory screen 

    Fig 2: Display - Measured Angles
    G07070355Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

IMPORTANT The inclination angles are calculated from the differences between the respective angle measurements.

Front articulation angle (∠1): 

Transmission to front propeller shaft.

Inclination angle in center (∠2): 

Front propeller shaft to rear propeller shaft.

Rear articulation angle (∠3): 

Rear propeller shaft to rear axle differential.

Fig 3: Identifying Rear Propeller Shaft And Rear Axle Differential
G07070356Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

IMPORTANT If an inclination angle is outside of the tolerance, it must be corrected. All articulation angle differences should be as close as possible to the center of the relevant tolerance range.

A check measurement must be carried out after each inclination angle correction.

scientia non olet · About LEMON Manuals