Check values for propeller shaft alignment sleeve - BE41.10-P-1000-02L
Model 209, 211, 219
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 209.316 | Model 209.341/342/441/442 | Model 209.361/461 with transmission 716.6 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 24,8 | 23,3 | 34,8 |
| Rear propeller shaft | mm | 28,3 | 26,8 | 26,8 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 209.361/365/461/465 with transmission 722.6 | Model 209.372/375/472/475 | Model 209.376/476 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 23,3 | 24,8 | 22.4 |
| Rear propeller shaft | mm | 26,8 | 28,3 | 25,9 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 211.004/007/061/065/261/265 | Model 211.006/008/016/070/072/206/208/216/270/272 | Model 211.026/028/029/226 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 23,3 | 24,8 | 25,3 |
| Rear propeller shaft | mm | 26,3 | 28,3 | 28,8 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 211.020/022/220/222 with transmission 722.902 | Model 211.023/223 | Model 211.020/220 with transmission 716.6 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 25,3 | 24,8 | 24,8 |
| Rear propeller shaft | mm | 28,8 | 28,3 | 28,3 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 211.041/042/241/242 | Model 211.056/256 | Model 211.076/077/276/277 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 23,3 | 24,8 | 28,8 |
| Rear propeller shaft | mm | 26,8 | 28,3 | 28,8 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 211.08/09/28/29 except model 211.083/283 | Model 211.083/283 | Model 211.606/616/620 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 23,3 | 25,3 | 24,8 |
| Rear propeller shaft | mm | 26,8 | 28,8 | 28,3 | ||
| See picture | - | - | - | |||
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 219.354 | Model 219.322/372 | Model 219.356/357/375/376/377 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02L | Insertion dimension "a" from face end of alignment sleeve to joint flange | Front propeller shaft | mm | 23,3 | 25,3 | 24,8 |
| Rear propeller shaft | mm | 26,8 | 28,8 | 28,3 | ||
| See picture | - | - | - | |||