Remove/install brake pedal - AR29.10-P-4597T

MODEL 211 with TRANSMISSION 716.6, 722.6 

Shown on manual transmission 716.6 

Fig 1: Identifying Brake Pedal Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Remove foot controls (1)	Transmission 716.6 without Sequentronic automated manual transmission (ASG)	AR29.10-P-0300T
		Transmission 722.6 Transmission 716.6 with Sequentronic automated manual transmission (ASG) code 424	AR29.10-P-0300TA
2	Remove circlip (2).
3	Remove washer (3)
4	Remove brake pedal (4)
	Checking
5	Check bushing (5) for signs of wear and replace if necessary	Installation:  Apply light coating of grease (5) to inside diameter.
		Long-life grease	*BR00.45-Z-1001-06A
6	Check rubber pad (6) for signs of wear and replace if necessary
7	Install in the reverse order