Replace rubber window spacers - AR67.10-P-1000-02T

Remove protective foil from rubber window spacers (A) only on one side. Remove protection foil in rubber lip from windshield.

1. Glue rubber window spacers (A) to lower body flange at old positions.
2. Glue rubber window spacers (A) to upper body flange at old positions.

   Only on vehicles with code (413) Panoramic sliding roof or with code (419) Solar module for panoramic sliding sunroof.

   Fig 1: Identifying Rubber Window Spacers

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.