Install rear side window - AR67.30-P-4000-08PB

Shown on model 169.0 

Fig 1: Checking Fit Of Rear Side Window (Shown On Model 169.0)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 203.2 

Fig 2: Identifying Rear Side Window And Mounting Clips (Shown On Model 203.2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 203.7 

Fig 3: Identifying Rear Side Window, Mounting Clips And Catch Hook (Shown On Model 203.7)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Position cup suction tool on rear side window (1).

   Cup suction tool

   gotis://K_67.0_03.0 

1. 2.1 Insert rear side window (1) into body cutout and align at body transitions.

   In model 169, 245.2.

2. 2.2 Align rear side window (1) on mounting clips (2) and install.

   In model 203.2, 203.7, 204.2/9, 211.2.

3. 3.1 Press on rear side window (1) until it makes contact with body flange.

   In model 169, 245.2.

   Check fit of rear side window (1) in relation to closed rear door (arrows).

4. 3.2 Press on rear side window (1) until mounting clips (2) arrest.

   Model 203.7: Press on rear side window (1) until catch hook (3) also arrests, otherwise rear side window (1) can be damaged by loosening.

   In model 203.2, 203.7, 204.2/9, 211.2.

5. 4 Secure rear side window (1) against falling down using fabric tape.

The curing time of the adhesive material is approx. 2 h measured from the time the rear side window (1) is installed.