Remove/install bumper protective strip - AR88.80-P-2220T

MODEL 211.0/2/6 up to 31.5.06 

Front bumper 

Fig 1: Locating Bumper Protective Strip Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Protect paint on front bumper (2) with strips of adhesive tape in area of protective strip (1).	To avoid damaging paint.
2	Unclip protective strip (1) at catch hooks (arrows) from front bumper (2) with long wedge	Unclip toward center of bumper starting at outside.
			*115589035900
3.1	Disconnect electrical connectors (3) from Parktronic system sensors (PTS) and remove protective strip (1)	On vehicles with code (220) Parktronic system (PTS) When replacing protective strip (1) do not disconnect electrical connectors (3).
4.1	Remove Parktronic system sensors (PTS)	On vehicles with code (220) Parktronic system (PTS) When replacing center protective strip (1), unclip Parktronic system sensors (PTS) together with bracket from protective strip (1).	AR54.65-P-0001T
5	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.