Remove/install rear door trim strip - AR72.12-P-1009T

MODEL 211.2 

Fig 1: Identifying Rear Door Trim Strip Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/Install
1	Remove inner sealing rail from rear door		AR72.12-P-1013T
2	Remove outer sealing rail from rear door		AR72.12-P-1014T
3	Remove door foil (2) from rear door	Remove door foil (2) from inner door panel until screw (3) is accessible	AR72.12-P-0105T
4	Unscrew screw (3).
5	Loosen window seal (4) at upper rear corner from window frame	until screw (5) is accessible.
6	Unscrew bolt (5).
7	Slide fixed window (6) approx. 10 cm toward front	Installation:  Use lubricant.
		Antifriction agent	*BR00.45-Z-1010-06A
8	Remove screw (7)
9	Remove trim strip (1) from rear door
10	Install in the reverse order

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67