Remove/install interior lamps on D-pillars - AR82.20-P-0112T
MODEL 211.2
Shown on right load compartment lamp
MODIFICATION NOTES
| 14.1.04 | Disconnect/connect/remove ground lead from battery |
| Remove/Install | |||
| 1 | Switch off left load compartment lamp (E15/8) and right load compartment lamp (E15/9) by locking the rear-end door lock using an appropriate screwdriver | ||
| 2 | Using a long wedge carefully unclip the left load compartment lamp (E15/8) or right load compartment lamp (E15/9) from the paneling on the D-pillar (1) | ||
| *115589035900 | |||
| 3 | Disconnect electrical connector from left load compartment lamp (E15/8) or right load compartment lamp (E15/9) | ||
| 4 | Remove left load compartment lamp (E15/8) or right load compartment lamp (E15/9) | ||
| 5 | Install in the reverse order |