Remove/install inner tie rod with axial joint - AR46.40-P-0201TX

MODEL 219 

Fig 1: Identifying Inner Tie Rod With Axial Joint Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove tie rod		AR46.40-P-0200TX
2	Remove bellows		AR46.40-P-0400TX
3	Counter-hold rack using open-end wrench (012) (arrow)		Fig 2
4	Remove inner track rod with axial joint (12)	Do not use force (hammer blows, excessive leverage) otherwise you may damage the steering gear.
			*BA46.40-P-1003-01E
5	Install in the reverse order

TIE ROD

Number	Designation		Model 219
BA46.40-P-1003-01E	Inner track rod with axial joint to rack-and-pinion joint	Nm	110

Fig 2: Identifying Open End Wrench (201 589 00 01 00)

Courtesy of MERCEDES-BENZ USA