Remove/install front floor coverings (left) - AR68.20-P-2050TX

MODEL 219.3 

Fig 1: Identifying Front Floor Coverings (Left) Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Completely move left front seat toward rear	See Operating Instructions
2.1	Remove floor protection mat from footwell	If installed
3	Remove left door sill molding (2)		AR68.30-P-4100TX
4	Remove paneling (3) in left footwell		AR68.30-P-4020TX
5	Remove accelerator pedal (4)		AR30.12-P-1321TX
6	Pull out floor coverings (1) below center console (5) and instrument panel cover (6) and remove from vehicle	Ensure that floor coverings (1) is seated correctly below center console (5) and instrument panel cover (6)
7	Install in the reverse order