Remove/install fender liner in front fender - AR88.10-P-1300TX

MODEL 219.3 

Shown on left side of vehicle and front wheel removed 

Fig 1: Identifying Fender Liner In Front Fender Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Raise vehicle with lifting platform		AR00.60-P-1000TX
2.1	Turn front wheels all the way to the left	When removing right rear fender liner section (3).
2.2	Completely turn front wheels to right	When removing left rear fender liner section (3).
3	Unscrew nuts (2)
4	Remove expansion rivets (4)
5	Unscrew bolts (5)
6	Unscrew bolt (6) and loosen rear bottom engine compartment paneling section (7)
7	Loosen rear fender liner section (3) from front fender with mounting wedge and remove	Ensure that rear fender liner section (3) and rubber seals are seated correctly.	Fig 2
8.1	Remove front fender liner section (1) in front fender.	Only when removing front fender liner section (1) and rear fender liner section (3).	AR88.10-P-1310TX
9	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA