Remove/install CD changer - AR82.64-P-7508TX
MODEL 219.3 with CODE (819) CD changer
MODIFICATION NOTES
| 5.7.06 | "Disconnect/connect battery ground line" removed |
| Remove/Install | |||
| Notes on avoiding damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage to fiber optic cables during repair work | AH82.60-P-0001-05TX | ||
| 1 | Move selector lever to rear-most position. | ||
| 2 | Remove ashtray from front center console | AR68.20-P-2400TX | |
| 3 | Unplug fiber optic cable connector (2) | ||
| 4 | Unclip electrical connectors (3) and disconnect | ||
| 5 | Unclip fiber optic cable connector (2) from bracket (6) towards the front | ||
| 6 | Remove bolts (4) | ||
| 7 | Pull housing (5) with CD changer (A2/6) out of center console | ||
| 8 | Unclip bracket (6) from housing (5) and take off | ||
| 9 | Remove bolts (7) and pull UCP [OBF] carrier open and close motor (M8) from lever (9) | ||
| 10 | Open cover (10) all the way | ||
| 11 | Remove bolts (11) and bolts (12) | ||
| 12 | Remove CD changer (A2/6) from housing (5) | ||
| 13 | Install in the reverse order |