Remove/install cover below instrument panel (left) - AR68.10-P-1500P

MODEL 203, 209 

Shown on model 203.0 

Fig 1: Identifying Cover Below Instrument Panel Components - Shown On Model 203.0

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Unclip cap (2) with potential distributor (CAN) cockpit connector (X30/6) from cover below left instrument panel (4)
2	Unclip potential distributor (CAN) cockpit connector (X30/6) from cap (2) and guide through cover below left instrument panel (4)
3	Unscrew bolt (5) from release (6) of engine hood cable (1)
4	Loosen release (6) from cover below left instrument panel (4) and guide through cover below left instrument panel (4)
5	Remove bolts (3)
6	Fold down cover below instrument panel (4) on left
7	Release data link connector (X11/4) and disconnect
8	Remove cover below instrument panel (4) on left.	Installation:  Ensure that air ducting is seated properly.
9	Install in the reverse order