Seam sealing following repair, detachable body components - AR97.10-P-4000-04TA

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	Sealant, white, 310 ml, DB supply specification 6069.20	A 001 989 63 20
BR00.45-Z-1041-01A	Seam sealant, sprayable 310 ml	A 002 989 84 20

Seal spot welds and rivets in repaired area with seal seam sealing material
Insert plastic plugs and rubber grommets with sealing compound.

Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant.

It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side, only seal corresponding surface.

Observe standard seals!

Engine hood area

Fig 1: Identifying Seam Sealing - Engine Hood Area

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Driver door area

Fig 2: Identifying Seam Sealing - Driver Door Area

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Seam Sealing - Rear Door And Window Edge Area

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Rear door and window edge area

Liftgate area

Fig 4: Identifying Seam Sealing - Liftgate Area

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.