Push the boot onto the steering gear housing and position - AR46.40-P-0400-02CW
WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.
Shown on steering gear, model 204
- Push boot (1) onto steering gear housing (2).
Model 204, 207, 212, 218: Slide on until the recesses (1a) are at the housing (2) of the steering gear.
- Position boot (1).
As shown in the picture the diaphragm valve (1b) must be located in the center of the marking (2m).
Model 164, 171, 203, 209, 251:
The diaphragm valve (1b) must point in the direction of travel.
Model 211, 219:
The diaphragm valve (1b) must point opposite to the direction of travel.