Remove/install seat cushion motor for front seat - AR91.29-P-1422SC

MODEL 216.3 

Seat cushion inclination motor 

Shown on left front seat 

Fig 1: Identifying Seat Cushion Motor For Front Seat Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove front seat (1)		AR91.10-P-1000SC
2	Unscrew nuts (2)
3	Remove cable tie (3)
4	Detach electrical connector (4) and remove left front seat cushion inclination motor (M27/9) or right front seat cushion inclination motor (M28/9)	Release electrical connector (4) carefully, risk of breakage to electrical connector plug (4). The plug is not available as a replacement part.
5	Install in the reverse order
6	Normalize front seat (1)
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A