Remove/install additional battery relay - AR54.15-P-2000SX
MODEL 216, 221 with CODE (B03) ECO start/stop function
Shown on model 216
| Remove/install | ||
| 1 | Detach ground line of on-board electrical system battery | AR54.10-P-0003SX |
| 2 | Detach ground line from additional battery for ECO start/stop function (G1/13) | AR54.10-P-0007SXS |
| 3 | Unscrew nuts (2) and remove relay for ECO start/stop function (K98) | |
| 4 | Take off cover (3) | |
| 5 | Unscrew nuts (4) and remove electrical line (6) | |
| 6 | Unscrew nuts (5) and remove electrical line (7) | |
| 7 | Disconnect electrical connector (8) | |
| 8 | Remove relay for ECO start/stop function (K98) | |
| 9 | Install in the reverse order |