ME-SFI limiting maximum vehicle speed, function - GF07.61-P-3019MIS
ENGINE 272.9 (except 272.974) in MODEL 221.0 /1 (except 221.095 /195) as of model year 2009/AEJ 08
ENGINE 273.9 in MODEL 216.3, 221.0 /1 as of model year 2009/ AEJ 08
Function requirements for maximum speed limit, general points
- Circuit 87M ON (engine control ON)
- Engine running
Maximum speed limit, general points
For vehicles with the corresponding engine power, the ME-SFI [ME] control unit (N3/10) limits the maximum speed to 250 km/h.
The ME-SFI [ME] control unit receives the vehicle speed information over the chassis CAN (CAN E) from the ESP control unit (N47-5).
Maximum speed limit function sequence
If 250 km/h is reached, the ME-SFI [ME] control unit reduces the opening angle of the throttle valve (throttle valve actuator (M16/6)) and the injection time of the fuel injection valves (Y62).
These measures ensure simple maximum speed limitation the reduction of the engine torque.
| Electrical function schematic, maximum speed limit | Model 216 | PE07.61-P-2779-97CAB | ||
| Component description for ME-SFI [ME] control unit | N3/10 | Engine 273 | GF07.61-P-6000MLS | |