Reset, function - GF54.50-P-2010SX

MODEL 221.0 /1, 216.3 up to Model Year 8 

The contents of the "After start" (short-distance memory) or "After reset" (long-distance memory) display screen of the trip computer (RRE) can be reset manually. To do this, via the system selection button (S110s3) of the multifunction steering wheel (MFL) the menu item "Trip" is to be selected which is displayed as of position 2 (circuit 15 ON) of the transmitter key (A8/1).

The manual resetting of the "After start" or "After reset" takes place in the following sequence:

• Once the menu item "Trip" has been activated in the multifunction display (A1p13), via the scroll forward/back button (S110s1) of the multifunction steering wheel the values "After start" or "After reset" are displayed and confirmed with the OK button (S110s6).
• The submenu "Reset values?" is activated by the system selection button. 2 answer options appear.
• The answer "Yes" is selected with the scroll forward/back button and confirmed with the OK button.
• The "After start" or "After reset" display is reset.

In all submenus of the menu item "Trip" by pressing the "Back" and VCS Off button for a longer period (approx. 3 seconds) (S110s4) the displayed and stored values can be reset without confirmation by the OK button.

If the transmitter key is at position 0 (circuit 15C) or the transmitter key has been removed, all values in the short-distance memory are reset after 4 hours. If the transmitter key is turned into position 1 (terminal 15R ON) during this time, the erasing rate window (4 h) starts again if the transmitter key is turned into position 0 (terminal 15C) or removed.

Once the short-distance memory has been reset there is not sufficient data available to calculate the fuel consumption correctly. In order to bridge this condition, during this time depending on the coding of the national version of the instrument cluster (A1) a value calculated via the vehicle-specific consumption is displayed. The display limit lies at 40 l/100 km.