Front fog lamp actuation, function - GF82.10-P-3070SX
MODEL 216.3, 221.0 /1 up to Model Year 8
Shown on model 221
Front fog lamp actuation
Function requirements
- Circuit 30
- Standing lights or low beam On
Function
The switch position of the rotary light switch is read in over the UCP [OBF] LIN by the upper control panel control unit.
The upper control panel control unit places the request on the interior CAN.
The front SAM control unit receives the request and actuates the front fog lamps.
The front fog lamps indicator lamp in the rotary light switch visually indicates that the front fog lamps are switched on.
Rear fog lights actuation
Function requirements:
- Circuit 30
- Standing lights or low beam On
Function
The switch position of the rotary light switch is read in over the UCP [OBF] LIN by the upper control panel control unit.
The upper control panel control unit places the request on the interior CAN. The request is forwarded by the front SAM control unit to the rear SAM control unit.
The rear SAM control unit actuates the left rear fog light.
The rear fog lamp indicator lamp in the rotary light switch provides visual feedback that the left rear fog light is on.
Vehicles with code (550) Trailer hitch
The front SAM control unit forwards the request over the interior CAN to the trailer recognition control unit which actuates the trailer hitch socket.
During trailer operation, the left rear fog light on the tractor vehicle is not actuated.
| Driver-side SAM control unit with fuse and relay module, component description | N10/1 | GF54.21-P-6010SX |
| Rear SAM control unit with fuse and relay module, component description | N10/2 | GF54.21-P-6030SX |
| Trailer recognition control unit component description | N28/1 Model 221 with code (550) Trailer hitch |
GF31.19-P-4050SX |
| Upper control panel control module component description | N72/1 | GF54.21-P-6040SX |
| Rotary light switch, component description | S1 | GF82.10-P-4106SX |