Remove/install pull cable for engine hood - AR88.40-P-3100SC
MODEL 216 Engine hood cable front section
| Remove/install | |||
| 1 | Unscrew bolts (1) and unclip radiator grille (2) with suitable tool (arrows). | ||
| 2 | Remove engine hood catch lower section (9) | see AR88.40-P-3200SX | |
| 3 | Disconnect weather-stripping (7) in area of radiator crossmember (6) | ||
| 4 | Open splitter (4) and unhook engine hood cable rear section (3) | ||
| 5 | Unscrew bolts (8, 12) and lift radiator crossmember (6). | ||
| 6 | Unclip engine hood cable front section (5) on bottom side of radiator crossmember (6) from clips (11) and remove. | ||
| 7 | Install in the reverse order |