LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> C350 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Basic Knowledge - C63/C350 (204) >> Basic Knowledge >> Power flow in 7th gear, function - GF27.10-P-3026AHW

Power flow in 7th gear, function - GF27.10-P-3026AHW

TRANSMISSION 722.9 in MODEL 204.0 as of model year 2009/YoM 08 

TRANSMISSION 722.9 in MODEL 204.0 as of model year 2012/YoM 11 model refinement package 

TRANSMISSION 722.9 in MODEL 204.2 as of model year 2009/YoM 08 

TRANSMISSION 722.9 in MODEL 204.2 as of model year 2012/YoM 11 model refinement package 

TRANSMISSION 722.9 in MODEL 204.3 

TRANSMISSION 722.9 in MODEL 204.9 

Fig 1: Identifying Transmission Power Flow Function Diagram (7th Gear)
G07539643Courtesy of MERCEDES-BENZ USA

Function requirements for power flow in 7th gear, general 

Power flow in 7th gear, general 

The following multi-disk brakes and multi-disk clutches are engaged:

In 7th gear, the power flows through the following gear sets:

Ravigneaux gear set 

The small ring gear (5) is driven via the transmission input shaft. The long planetary gears (50) drive the short planetary gears (49) which roll in the stalled large ring gear (8). The increased torque and reduced rotational speed as a result are transmitted to the dual planet carrier (6).

Rear single planetary gear set 

The ring gear (9) rotates at the same speed due to the mechanical connection to the dual planet carrier (6). The planetary gears (51) transmit the rotary motion to the sun gear (11). Sun gear (11) passes on the rotational speed to sun gear (14) via the closed multi-disk clutch K3 (48).

Front single planetary gear set 

The transmission input torque and transmission input speed are transmitted to the ring gear (12) by the closed multi-disk clutch K2 (47). The speed difference between the sun gear (14) and ring gear (12) results in a speed increase and torque reduction. These are passed on via the planet carrier (13) to the transmission output shaft. The transmission output shaft thus rotates with reduced transmission input speed in the direction of rotation of the engine.

  Overview of system components for automatic transmission (AT)   GF27.10-P-9992AHW