Carry out distance and comparison measurements on front and rear axles - AR40.30-P-0402CW

MODEL 204, 207, 212, 218

Front axle, shown on model 204.0 without 4MATIC

Fig 1: Identifying Front Axle Dimensions (Shown On Model 204.0 Without 4MATIC)

Courtesy of MERCEDES-BENZ USA

Rear axle, shown on model 204.0 without 4MATIC

Fig 2: Identifying Rear Axle Dimensions (Shown On Model 204.0 Without 4MATIC)

Courtesy of MERCEDES-BENZ USA

	Measure
1	Perform preparations for distance and comparative measurements	Model 204, 207	AR40.30-P-0401CW
		Model 212, 218	AR40.30-P-0401EW
2	Carry out distance measurement on front axle	For front end damage Depending on the accident damage, further individual measuring points can be defined for a comparative measurement.
		Model 204, 207	AR40.30-P-0402-01CW
		Model 212, 218	AR40.30-P-0402-01EW
		Test specifications for distance measurement of front axle	*BE40.30-P-1001-06I
			*170589006300
			*124589086300
			*124589011900
			*124589021900
			*168589076300
3	Carry out distance measurement on rear axle	For rear end damage
		Depending on the accident damage, further individual measuring points can be defined for a comparative measurement.
		Model 204.0/2, 207	AR40.30-P-0402-02CW
		Model 204.9	AR40.30-P-0402-02CZ
		Model 212, 218	AR40.30-P-0402-02EW
		Test specifications for distance measurement of rear axle	*BE40.30-P-1001-05H
			*170589006300
			*124589086300
			*124589011900
			*124589021900
			*168589076300

TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENT ON FRONT AXLE

Number	Designation			Model 204, 207	Model 212	Model 218
BE40.30-P-1001-06I	Dimension	V1	mm	810 (±2)	880 (±2)	880 (±2)
		V2	mm	1214 (±2)	1315 (±2)	1315 (±2)
		V3	mm	942 (±2)	955 (±2)	955 (±2)
		V4	mm	852 (±2)	854 (±2)	854 (±2)
		V5	mm	818 (±2)	818 (±2)	818 (±2)

TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE

Number	Designation			Model 204.0/2, 207	Model 204.9
BE40.30-P-1001-05H	Dimension	H1	mm	1760 (±2)	1760 (±2)
		H2	mm	2237 (±2)	2230 (±2)
		H3	mm	1071 (±2)	1071 (±2)
		H4	mm	794 (±2)	794 (±2)
		H5	mm	1076 (±2)	1076 (±2)

TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE

Number	Designation			Model 212	Model 218
BE40.30-P-1001-05H	Dimension	H1	mm	1785 (±2)	1785 (±2)
		H2	mm	2248 (±2)	2248 (±2)
		H3	mm	1070 (±2)	1070 (±2)
		H4	mm	791 (±2)	791 (±2)
		H5	mm	1076 (±2)	1076 (42)

Fig 3: Identifying Telescopic Measuring Rod (124 589 01 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Telescopic Measuring Rod (124 589 02 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Mount (170 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Identifying Set Of Measurement Fixtures (168 589 07 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 7: Identifying Connecting Pieces (124 589 08 63 00)

Courtesy of MERCEDES-BENZ USA