Rear axle torsion bar - BA32.20-P-1000-04N
WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 204, 207, 212, 218
MODIFICATION NOTES
| 6.10.08 | Value changed: Bolt, stabilizer bar to rear axle carrier | Model 212 |
REAR AXLE STABILIZER BAR
| Number | Designation | Model 204 except model 204.077/277/377 | Model 204.077/277/377 | Model 207 | Model 212 | ||
|---|---|---|---|---|---|---|---|
| BA32.20-P-1001-04N | Nut, link rod to spring control arm | Stage 1 | Nm | 20 | 35 | 20 | 20 |
| Stage 2 | ∠° | 180 | - | 180 | 180 | ||
| BA32.20-P-1002-04N | Nut, link rod to stabilizer bar | Nm | 50 | 50 | 50 | 50 | |
| BA32.20-P-1003-04N | Bolt, torsion bar to rear axle carrier | Nm | 80 | 70 | 80 | 80 |
REAR AXLE STABILIZER BAR
| Number | Designation | Model 218 | ||
|---|---|---|---|---|
| BA32.20-P-1001-04N | Nut, link rod to spring control arm | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 180 | ||
| BA32.20-P-1002-04N | Nut, link rod to stabilizer bar | Nm | 40 | |
| BA32.20-P-1003-04N | Bolt, torsion bar to rear axle carrier | Nm | 80 |