Bolt, suspension strut to suspension strut tower modified - BT32.25-P-0002-01CW
WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204
The bolt has been modified because of the improvement measures to the bolted connection for the suspension strut to the suspension strut tower.
The new bolt can be recognized by its larger collar diameter. A new coating on the bolt means that the tightening torque is also lower now.
If the suspension strut has been released on the suspension strut tower, the bolt has to be replaced (only when the old version was installed).
Only the new version is sent out as a replacement part.