Section 62 (Overall Vehicle -- Safety Precautions -- C300 4MATIC (204.081))
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
- Safety Precautions
- Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension - AS00.00-Z-0001-01A
- Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
- Risk of death. Death may occur if body parts are drawn into rotating vehicle parts. - AS00.00-Z-0004-01A
- Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns from working on the vehicle as it is being started or when the engine is running - AS00.00-Z-0005-01A
- Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) - AS00.00-Z-0006-01A
- The high voltage used for arc welding presents a lethal hazard. Explosion hazard when welding in the area of highly combustible materials. Risk of injury from weld splatter and UV light when welding. Risk of poisoning when inhaling welding vapors. - AS00.00-Z-0007-01A
- Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
- Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
- Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. - AS00.00-Z-0011-01A
- Risk of injury from fingers being pinched or jammed when working on gas struts under pressure - AS00.00-Z-0012-01A
- Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. - AS00.00-Z-0013-01A
- Risk of injury. Rubber mounts and bearing parts can suddenly come loose during installation/removal and shoot wildly through the air. - AS00.00-Z-0014-01A
- Risk of explosion from pressurized spray cans - AS00.00-Z-0015-01A
- Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes - AS00.00-Z-0016-01A
- Risk of injury caused by scraping or cutting body parts on sharp vehicle part - AS00.00-Z-0017-01A
- Risk of death caused by body parts being pulled in by rotating vehicle wheels and roller dynamometer rollers - AS00.00-Z-0019-01A
- Risk of death caused by contact with parts conducting high voltages. - AS00.00-Z-0020-01A
- Risk of death caused by coming into contact with components of a 220 V system - AS00.00-Z-0021-01A
- Risk of death caused by work performed on liquefied gas systems - AS00.00-Z-0022-01A
- Risk of injury to hands or eyes when working on hydraulic pressure reservoir systems caused by hydraulic fluid to specification 345.0 spraying out under pressure - AS00.00-Z-0028-01A
- Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing. - AS00.19-Z-0001-01A
- Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering. - AS00.19-Z-0002-01A