Correcting rear articulation angle at rear axle center assembly - AR41.10-P-0086-05CW
REAR AXLE CARRIER TIGHTENING TORQUE
| Number | Designation | MODEL 204 |
|---|---|---|
| BA35.10-P-1005-01N | Rear axle differential to front adapter | 65 Nm |
Correct rear inclination angle (3)
To correct the articulation angle at the rear axle differential, appropriate shims (arrow) are available as replacement parts.
The shims are available in thicknesses from 1 mm to 4 mm, where 1 mm corresponds to a change in the inclination angle of approx. 0.25° to 0.33°.
Support rear axle differential.
Unscrew bolt connecting rear axle differential to front differential mount.
Depending on the correction, insert the appropriate shim together with the bolt.
Tighten bolt.
Remove transmission jack and transmission platform.