Propeller shaft - BE41.10-P-1000-01G
Model 204, 207, 212, 218
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE
| Number | Designation | Model 204 except 204.077/277 | Model 204.077/277 | |
|---|---|---|---|---|
| BE41.10-P-1001-01G | Front inclination angle from transmission to front propeller shaft (∠1) | ∠° | -0.33...+0.67 | -0.50 to +0.67 |
| BE41.10-P-1002-01G | Center inclination angle from front propeller shaft to rear propeller shaft (∠2) | ∠° | +0.00...+0.83 | +0.00...+0.83 |
| BE41.10-P-1003-01G | Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) | ∠° | -0.83...-0.17 | -0.98...-0.33 |
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE
| Number | Designation | Model 207 | |
|---|---|---|---|
| BE41.10-P-1001-01G | Front inclination angle from transmission to front propeller shaft (∠1) | ∠° | -0.33...+0.67 |
| BE41.10-P-1002-01G | Center inclination angle from front propeller shaft to rear propeller shaft (∠2) | ∠° | +0.00...+0.83 |
| BE41.10-P-1003-01G | Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) | ∠° | -0.83...-0.17 |
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE
| Number | Designation | Model 212 except 212.074/077/274/277 | Model 212.074/077/274/277 | |
|---|---|---|---|---|
| BE41.10-P-1001-01G | Front inclination angle from transmission to front propeller shaft (∠1) | ∠° | -0.33...+0.67 | -0.3...+0.2 |
| BE41.10-P-1002-01G | Center inclination angle from front propeller shaft to rear propeller shaft (∠2) | ∠° | +0.17 to +1.00 | -0.3...+0.3 |
| BE41.10-P-1003-01G | Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) | ∠° | -1.00 to -0.17 | -0.4...-0.9 |
CHECK VALUES FOR PROPELLER SHAFT INCLINATION ANGLE
| Number | Designation | Model 218 except 218.374 | Model 218.374 | |
|---|---|---|---|---|
| BE41.10-P-1001-01G | Front inclination angle from transmission to front propeller shaft (∠1) | ∠° | -0.33...+0.67 | -0.3...+0.2 |
| BE41.10-P-1002-01G | Center inclination angle from front propeller shaft to rear propeller shaft (∠2) | ∠° | +0.17 to +1.00 | -0.3...+0.3 |
| BE41.10-P-1003-01G | Rear inclination angle from rear propeller shaft to rear axle center assembly (∠3) | ∠° | -1.00 to -0.17 | -0.4...-0.9 |