Check values for propeller shaft alignment sleeve - BE41.10-P-1000-02M
Model 172, 204, 207, 212, 218
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 172.447/448 | Model 172.457 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 23.3 | 24.8 |
| Rear propeller shaft | mm | 26.8 | 28.3 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 204.001/201 | Models 204.000/002/200/202 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 24.8 |
| Rear propeller shaft | mm | 36.2 | 36.3 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 204.003 with automatic transmission | Model 204.006/007/041/044/045/046/048/049/052/054/081/082/085/087/089/092/207/241/245/246/248/249/252/254/282/289/292/981/982/983/984/987/992 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 23.3 |
| Rear propeller shaft | mm | 36.2 | 26.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 204.008/047/056/065/208/247/256/901/902/956 | Model 204.022/025/222/225 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 25.3 |
| Rear propeller shaft | mm | 28.3 | 28.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 204.077/277 | Model 204.203, model 204.003 with manual transmission | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 28.8 | 25.3 |
| Rear propeller shaft | mm | 28.8 | 36.2 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 207.302/402 | Model 207.303/403 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 25.3 |
| Rear propeller shaft | mm | 36.3 | 36.2 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 207.320/322/372/420/422/472 | Model 207.347/356/357/447/456/457 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 25.3 | 24.8 |
| Rear propeller shaft | mm | 28.8 | 28.3 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 207.348/448 | ||
|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 23.3 |
| Rear propeller shaft | mm | 26.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 212.002/005/202/205 | Model 212.003/020/074/077/203/220/274/277, Model 212.024/025/224/225 with auto. transmission | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 25.3 |
| Rear propeller shaft | mm | 36.3 | 36.2 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 212.047/093/247/293 | Model 212.041/048/054/082/084/087/089/090/147/148/248/254/282/284/287/288/289 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 23.3 |
| Rear propeller shaft | mm | 28.3 | 26.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 212.053/056/057/256/257 | Model 212.023/072/223, 272, Model 212.024/025/224/225 with man. transmission | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 36.3 | 25.3 |
| Rear propeller shaft | mm | 28.3 | 28.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 212.154 | ||
|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 34.8 |
| Rear propeller shaft | mm | 26.8 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 218.303/323/373 | Model 218.359 without code 460/494 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 25.3 | 36.3 |
| Rear propeller shaft | mm | 28.8 | 28.3 |
CHECK VALUES FOR PROPELLER SHAFT ALIGNMENT SLEEVE
| Number | Designation | Model 218.359 with code 460/494, model 218.391 | Model 218.374 | ||
|---|---|---|---|---|---|
| BE41.10-P-1001-02M | Press-in dimension "a" from face end of centering sleeve to joint flange | Front propeller shaft | mm | 24.8 | 25.3 |
| Rear propeller shaft | mm | 28.3 | 36.2 |