Remove/install inner door handle on front door - AR72.10-P-3600V

MODEL 171.4 

Fig 1: Identifying Inner Door Handle Components On Front Door

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove door liner (2) on left or right front door	Put down door liner (2) on a suitable base to avoid damage.	AR72.10-P-1000V
2	Center marking lines (A) in relation to plastic bonded points and drill hole (B) as illustrated	Diameter of hole (B) should be 13 mm.
3	Unscrew bolt (3).	Bolt (3) not easily accessible via hole (B), fasten bolt (3) on screwdriver
4	Unscrew bolt (4) and remove door handle (1) from armrest (5)
5.1	Remove paneling (6) from door handle (1)	Only when replacing door handle (1).
6.1	Remove driver-side power window switch group (S20/1) or passenger-side power window switch (S21/2) from door handle (1)	Only when replacing door handle (1).	AR72.29-P-0100V
	Install
7.1	Install driver-side power window switch group (S20/1) or passenger-side power window switch (S21/2) on door handle (1)	Only when replacing door handle (1).	AR72.29-P-0100V
8.1	Install paneling (6) on door handle (1)	Only when replacing door handle (1).
9	Insert door handle (1) into armrest (5) and screw in bolt (4)
10	Screw in bolt (3)	Bolt (3) not easily accessible via hole (B), fasten bolt (3) on screwdriver
11	Install door liner (2) on left and right front door		AR72.10-P-1000V