Remove/install shield at transmission - AR27.40-P-0700-01V
HOUSING
| Number | Designation | Transmission 722.9 | Transmission 722.6 except 722.660/661/66 2/663/666/674 | |
|---|---|---|---|---|
| BA27.40-P-1014-01A | Bolt, heat shield to transmission housing | Nm | 9 | 6 |
| BA27.40-P-1019-01A | Bolt, leaf spring to transmission housing | Nm | 5 | 8 |
- Unscrew bolt (1) and remove shield (2) downwards.
- Press tie strap (4) out of shield (2) and remove shield (2).
Installation: Shield (2) must be located under leaf springs (3).
The leaf springs (3) must be modified when the transmission is replaced.
Shown on transmission 722.906