| |
Drain |
|
|
 |
Risk of poisoning
caused by swallowing the TIREFIT emulsion. Risk of injury
caused by skin contact and eye contact with the TIREFIT emulsion. Risk of fire
caused by ignition of the TIREFIT emulsion |
Do not swallow or come into contact with the TIREFIT tire sealant, which is an emulsion of rubber and terpene phenolic resin. No open fire or open light sources. |
- |
| 1 |
Remove wheel. |
|
|
 |
Remove/install wheels |
- |
| 2 |
Put tire down with valve facing upwards |
In order to prevent TIREFIT tire sealant (3) spraying out when unscrewing the valve element. |
|
|
TIREFIT tire sealant |
AH40.10-P-0001-01A |
| 3 |
Undo valve element from valve and deflate wheel |
|
|
| 4.1 |
Unscrew union nut of the valve body and press the valve body into the wheel |
Vehicles with code 475 Tire pressure monitor |
|
| 4.2 |
Pull valve out of disk wheel |
Vehicles without tire pressure monitor
Do not damage surface of disk wheels.
Push the valve debris remaining in the valve bore of the disk wheel into the inside of the wheel. |
|
| 5 |
Wheel with valve bore pointing downwards upright for 10 minutes and put down raised slightly |
In order to facilitate extracting the TIREFIT tire sealant (3). |
|
| 6 |
Attach hose (2) to empty tire sealant container (1) |
Replace the original hose of the tire sealant container (1) by a 400 mm long hose (2). |
|
| 7 |
Compress the tire sealant container (1) and immerse hose (2) through the valve bore of the disk wheel into the TIREFIT tire sealant (3) |
|
|
| 8 |
Reduce pressure on the tire sealant container (1) and suction off TIREFIT tire sealant (3) |
Position tire sealant container (1) under the wheel in order to make it easier to suction off the TIREFIT tire sealant (3). Approx. 90 % of the TIREFIT tire sealant (3) can be removed. |
|
| 9 |
Drill the tire contact patch with a spiral drill (10 mm dia.) and allow TIREFIT tire sealant (3) to drain into a suitable container |
If an empty tire sealant container (1) is not available |
|
 |
Clean |
|
|
| 10 |
Clean disk wheel |
Remove the remains of TIREFIT tire sealant (3) with a damp cloth. |
|
| 11 |
Replace tires |
|
AR40.10-P-1030A |
| 12 |
Place new tire repair kit TIREFIT (3) in the vehicle |
|
|
|
TIREFIT tire sealant - check expiry date. |
- |