Disposing of damper strut - OS32.25-P-0120-01A
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
Risk of injury from drilling gas-filled subassemblies or components (gas filling cannot ignite)
Wear safety glasses and face mask
- Drill damper strut in the area of the arrow with a 0.5 mm drill.
- Pump the damper strut empty by pressing the piston rod in several times. The quantity of oil is 250-500 cm 3 depending on the version.
Comply with regulations governing disposal of hydraulic oil
- Dispose of damper strut (old part).