LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> SLK350 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Paintwork -- 203 Chassis) >> Maintenance >> Use of metal dust remover - AP98.00-P-0636A

Use of metal dust remover - AP98.00-P-0636A

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 124, 126, 129, 140, 163, 168, 170, 201, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240 

MODEL 461.302 /332 /342 /345 

MODEL 463 

  Application     
1 Wash the vehicle IMPORTANT Then dry the vehicle.  
2 Cover door handles, windshield washer nozzles, windshield wipers and headlamp wipers    
DANGER Risk of injury  caused by caustic burns due to contact with metal dust remover. Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves. AS98.00-Z-0003-01A 
3 Apply metal dust remover and rub in under light pressure IMPORTANT Coat with a rag or soft brush for cleaning all painted surfaces and plastic parts.
The metal dust remover gets rid of metal dust (flash rust) from the paint by a chemical reaction.
IMPORTANT Do not use metal dust remover for routine car washes or for cleaning other forms of dirt.
IMPORTANT Only use in temperatures up to maximum 25 °C. Do not clean the vehicle in direct sunlight. Do not treat unpainted plastic parts with metal dust remover as the plastic may become discolored.
*BR00.45-Z-1017-04A 
4 Leave the metal dust remover to act NOTES Never extend the acting time otherwise the paint or the plastic parts may be attacked.
IMPORTANT Allow it to work in for a maximum of 10 min making sure that the metal dust remover does not dry. Treatment using a metal dust remover may be repeated if the cleaning effect is unsatisfactory.
 
5 Rinse off the vehicle with water    
6 Wash the vehicle with car shampoo IMPORTANT Then dry the vehicle. *BR00.45-Z-1002-04A 
7 Polish the treated surface with polish and a polishing wad IMPORTANT Polish by hand. Depending on the condition of the paint surface, treat beforehand with a polishing machine (buffer), polishing paste and polish if necessary. *BR00.45-Z-1013-04A 
8 Apply gloss preserver IMPORTANT To protect the paintwork from the elements. *BR00.45-Z-1014-04A 
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-04A Car shampoo A 001 986 41 71
BR00.45-Z-1013-04A Polish A 000 986 45 74
BR00.45-Z-1014-04A Gloss preserver A 000 986 44 74
BR00.45-Z-1017-04A Cleaner A 001 986 13 71