Release guide sleeves on Hardy couplings. - AR41.10-P-0050-09V

Drift for releasing the fitted sleeves in the flexible couplings

WF58.50-P-4110-01A

1. 1.1 Loosen fitted sleeves of flexible couplings using drift (shop-made tool) at transmission and rear axle joint flange.

   Propeller shaft installed 

   Fig 1: Loosening/Tightening Fitted Sleeves Of Flexible Couplings At Transmission And Rear Axle Joint Flange Using Drift

   Courtesy of MERCEDES-BENZ USA
2. 1.2 Loosen fitting sleeves of flexible coupling using the drift (shop-made tool) on three-arm flange or four-arm flange.

   Propeller shaft removed 

   Fig 2: Propeller Shaft Removed

   Courtesy of MERCEDES-BENZ USA