Remove/install tubular frame (open) limit switch - AR77.39-P-3722V

MODEL 171.4 

Fig 1: Identifying Tubular Frame (Open) Limit Switch Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Open retractable trunk partition (1)	See Operating Instructions
2	Open maintenance flap (2) in paneling (3)	Tubular frame open limit switch (S119) is accessible through maintenance flap (1)
3	Remove tie strap (4)	Installation:  Replace tie straps (4).
4	Unclip retainer tab (5)
5	Unclip tubular frame open limit switch (S119) from trunk lid actuation hydraulic cylinder (6)
6	Remove tubular frame open limit switch (S119) through maintenance flap (1) until electrical connector (7) is accessible
7	Disconnect electrical connector (7) and remove tubular frame open limit switch (S119)
8	Install in the reverse order