Remove/install xenon headlamp control unit - AR82.10-P-4632V
MODELS 171.4 with CODE (614) Bi-xenon headlamp unit
| Removal/installation | |||
|---|---|---|---|
| 1 | Switch off the ignition and remove the transmitter key from the EIS control unit | ||
| 2 | Release left or right telescopic nozzle of the headlamp cleaning system and allow it to hang down with the washer fluid hose attached | AR82.15-P-6100V | |
| 3 | Remove bolts (1) | ||
| 4 | Remove Xenon headlamp control unit (E1n1) from underside of left front lamp unit (E1) or Xenon headlamp control unit (E2n1) from underside of right front lamp unit (E2) | ||
| 5 | Install in the reverse order | ||
| 6 | Perform function test of left front lamp unit (E1) and right front lamp unit (E2) |