Switch interior lighting on by means of anti-theft alarm, function - GF82.20-P-2007R

MODEL 230

If an alarm is triggered by the anti-theft alarm system (ATA) , the front dome lamp is switched on without being dimmed. If the alarm is canceled, the lamp is again switched off.

Actuation

In the event of an ATA alarm, the message "ATA switch interior lamp on" is transmitted by the driver-side SAM control module (N10/10) over the interior CAN.
The overhead control panel control module (N70) reads this message and operates the dome lamp (N70e1).

	Switch dome lamp on/off, function		GF82.20-P-2033R
	Anti-theft alarm system (ATA [EDW]) function		GF80.50-P-0001R
	Overhead control panel control module, location/purpose/design/function		GF82.20-P-4101R
	Driver-side SAM control module with fuse and relay module, location/task/design		GF54.21-P-4109R