Remove/install parking brake pedal assembly - AR42.20-P-0510R
MODEL 230
MODIFICATION NOTES
| 11.12.02 | Check version of pedal assembly, added | Step 11 | BT42.20-P-0510-01A |
| Remove/install | |||
|---|---|---|---|
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Raise vehicle with lifting platform | ||
| 2 | Release cable slack adjuster (91) and unhook spring (94) | ||
| 3 | Remove left cover below instrument panel | AR68.10-P-1500R | |
| 4 | Remove side paneling in left front footwell | ||
| 5 | Loosen clamps (arrows) and remove cover (76) of pedal assembly (71) | ||
| 6 | Unplug parking brake indicator lamp connector | ||
| 7 | Unscrew bolts (72) and take off pedal assembly (71) | ||
| *BA42.20-P-1001-01A | |||
| Friction brake pedal assembly / parking brake, function | GF42.20-P-1000A | ||
| 8 | Disconnect brake cable (85) from tensioning shackle on parking brake pedal (75) and use unclipping device to unclip from holding lug | ||
| Fig 3 | |||
| 9 | Disconnect cable (79) for release of parking brake at pedal assembly (71) with tool (010) | ||
| Tool for releasing parking brake control cable | WF58.50-P-4220-01A | ||
| 10 | Install in the reverse order | ||
| Checking | |||
| 11 | Check version of pedal assembly (71) of parking brake | ||
| Parking brake pedal assembly modified | BT42.20-P-0510-01A | ||
| 12 | Operate parking brake pedal (75) and check pedal travel of parking brake pedal (75) | ||
| Adjusting parking brake. | AR42.20-P-0540R | ||
| Actuating force on parking brake pedal | *BE42.20-P-1001-01C | ||
| Notches through which the parking brake pedal must be depressed | *BE42.20-P-1002-01C |
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 230, pedal assembly with pulled detent | Model 230, pedal assembly with pushed detent | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
PARKING BRAKE
| Number | Designation | Model 230 | |
|---|---|---|---|
| BA42.20-P-1001-01A | Bolt, foot-operated parking brake pedal assembly at front wall pillar | Nm | 12 |