Remove/install paneling on top of center pillar - AR68.30-P-1077R

MODEL 230.4 except CODE (P99) "AMG Black Series" special model 

Fig 1: Identifying Paneling On Top Of Center Pillar Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Completely open Vario roof
2	Remove cover (2)
3	Open cap (3) and loosen bolt (4).	Installation:  Align paneling (1) so that it does not make contact with intermediate bearing to prevent noises.
4	Unclip paneling (1) from clips (5) with mounting wedge and remove from center console.		Figure
5	Install in the reverse order

Fig 2: Identifying Wedge Tool (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA