Remove/install C-pillar paneling on Vario-roof - AR68.30-P-4500R

MODEL 230.4 except CODE (P99) "AMG Black Series" special model 

Fig 1: Identifying C-Pillar Paneling On Vario-Roof Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury  caused by body parts being trapped  or crushed when working on partially open Vario roof (stop mode) or in its closing area as a result of the Vario roof suddenly collapsing	Secure Vario roof with a suitable special tool.	AS77.50-Z-0001-01A
1	Move Vario roof to intermediate position and secure.	The C-pillar should be positioned at approx. 90°.	AR77.50-P-3000-01R
			Figure
2	Unclip left C-pillar paneling (1) and right C-pillar paneling (2) with mounting wedge and remove.	Installation:  Replace damaged clips (3). Ensure that the seal (arrows) is seated correctly on the left C-pillar paneling (1) and right C-pillar paneling (2).
			Figure
3	Install in the reverse order

Fig 2: Identifying Mounting Wedge And Support

Courtesy of MERCEDES-BENZ USA