Remove, install paneling on rear bench seat cross strut - AR68.30-P-1404RBS (Black Series)
MODEL 230.4 with CODE (P99) "AMG Black Series" special model
| Remove/install | |||
|---|---|---|---|
| 1 | Move driver and front passenger seat toward front to end position | ||
| 2 | Remove rear wall paneling | AR68.30-P-4750RBS | |
| 3 | Remove speaker cover in rear | AR68.30-P-3445RBS | |
| 4 | Remove trim from C-pillar | AR68.30-P-4490RBS | |
| 5 | Loosen rear KEYLESS-GO antenna (A97) from paneling on cross strut (1) | On vehicles with code (889) Keyless go | AR80.61-P-0020RBS |
| 6 | Lift rear shelf (2) at front | ||
| 7 | Remove bolts (3, 4) | ||
| 8 | Remove paneling from cross strut (1) | ||
| 9 | Install in the reverse order |