Body Gap Dimensions & VIN Number Stamping

• General Information
  • General information on repairs to body - AH60.00-N-0001-01A
  • General information on riveting - AH60.00-P-0003-01N
  • Information on machining/treating magnesium components - AH60.00-P-0023-01R
  • Vehicle identification number - AH60.00-P-0800-02B
• Safety Precautions
  • Risk of fire and explosion caused by machining/treating magnesium components - AS60.00-Z-0006-01R
  • Risk of injury caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. - AS60.00-Z-0008-01R
• Testing & Repair
  • Gap dimensions at hoods, doors and covers - AR60.00-P-0700-01R
  • Stamp in vehicle identification number - AR60.00-P-0800R
    • Notes
    • Mount stamping guide - AR60.00-P-0800-01R
    • Stamping in vehicle identification number - AR60.00-P-0800-02R
    • Crossing out vehicle identification number and restamp in spare field - AR60.00-P-0800-05R
    • Cut out access opening for stamping guide - AR60.00-P-0800-06R
    • Close access opening for stamping guide - AR60.00-P-0800-07R
  • Testing and repair work: Passenger cars: Body - general - AR60.00-Z-9230AA
  • Set up/dismantle side portal bracket set - AR60.20-P-1700R
    • Notes
    • Setup sequence for portal straightening set for A and B-pillars - AR60.20-P-1700-05RA
    • Setup sequence for portal straightening set for A and B-pillars - AR60.20-P-1700-05RB
    • Setup sequence for portal straightening bracket set for mounting points specific to convertible cars - AR60.20-P-1700-07RA
    • Setup sequence for portal straightening bracket set for mounting points specific to convertible cars - AR60.20-P-1700-07RB
    • Tightening pattern for mounting screws of portal frame - AR60.20-P-1700-08KA
• Test & Adjustment Values
  • Gap dimensions - BE60.00-P-1000-01A
  • Test and adjustment values: Passenger cars: Body - general - BE60.00-Z-9999AZ