Install crossmember and weld in - AR64.20-P-1060-03SX

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1092-02A	Adhesive kit, body, 2-component adhesive	A 009 989 36 71
BR00.45-Z-1001-13A	Blind rivet 6.4x14	A 003 990 35 97
BR00.45-Z-1002-13A	Polygrip countersunk head rivet, 6.4 x14	A 003 990 86 97 05

Fig 1: Fastening Straightening Tool To Rear Crossmember

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Rivet Holes In Rear Crossmember (Areas A, B, C And D)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Rivet Holes In Rear Crossmember (Areas E, F, G And H)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Rivet Holes In Rear Crossmember (Areas I And J)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Rear Crossmember Adhesive Areas

Courtesy of MERCEDES-BENZ USA

Observe pretreatment of bonding surfaces.

Refer to manufacturer specifications for adhesive curing and application times.

Fig 6: Identifying Rivet Areas On Rear Crossmember (A, B, E And F)

Courtesy of MERCEDES-BENZ USA

Install rear crossmember (1) and fasten with manual temporary fasteners.
Rivet rear crossmember (1) with Polygrip flat/round head rivet, dia. 6.4x14 (areas A, B, E and F).

Fig 7: Identifying Rivet Areas On Rear Crossmember (C, D, G, H, I And J)

Courtesy of MERCEDES-BENZ USA

Rivet rear crossmember (1) with Polygrip flat/round head rivet, dia. 6.4x14 (areas G and H).
Rivet rear crossmember (1) with Polygrip flat/round head rivet, dia. 6.4x14 from outside (areas C and D).
Rivet rear crossmember (1) with Polygrip countersunk head rivet, dia. 6.4x14 (areas I and J).